NEW TS series Skid Steer Loader
ID:
1401
Units Available: 10
Category: Skid Steer Loader
International Certifications: EU, China, USA
NEW
Mileage Hrs/Kms: 0
Year of Manufacture: 2024
The price: P.O.A.
Why wait? There's no better time to reserve than right NOW
Units Available: 10
Category: Skid Steer Loader
International Certifications: EU, China, USA
NEW
Mileage Hrs/Kms: 0
Year of Manufacture: 2024
The price: P.O.A.
Why wait? There's no better time to reserve than right NOW
New TS series Skid Steer Loader HW-TS50, HW-TS65, HW-TS75, HW-TS100, HW-TS125 models.
Operating Load: 700-1500Kg
Bucket Capacity: 0.3-0.6cbm
Rated Power: 36-103kw
- TS series adopts rubber crawler walking system. The grounding ratio is low. Can adapt to soft ground and mountain driving operations. Equipped with a two-speed motor, the main engine speed can reach 18 km/h.
- Equipped with a high flow system, the maximum flow is 120 liters/min, 130 liters/min, and 140 liters/min. The rear of the main machine can be equipped with a ripper, and the maximum deep tillage is greater than 500mm.
All machines have passed the EU CE, France TUV, ISO quality certification. Don not worry about shipping, well choose the nearest shipping place to ship at the shortest time. We offer you the manufacturers price, which may be the most cost-effective.The specification of the TS series Skid Steer Loader
Skid Steer Loader Model/Technical parameters HW-TS50
Operating load (kg) 700
Max Speed（km/h） 0.67
Rated flux (L/min) 60
High Flow Flux (L/min)
Tire（track） model 300X52.5
Rated power (Kw) 36
Fuel tank capacity (L) 50
self weight bucket (kg) 2800
Bucket capacity (m3) 0.3
Overall operating height (mm) 3350
Height to bucket hinge pin (mm) 2770
height to top of cab (mm) 2050
Height to bottom of level bucket(mm) 2603
Overall length without bucket（mm） 2300
overall length with bucket(mm) 2950
Dumping angle at maximum height(° ) 40
Dumping height(mm) 2100
Dumping reach(mm) 790
Rollback o bucket on ground(° ) 30
Rollback of bucket at full height(° ) 104
Wheelbase(mm) 1240
Ground clearance(mm) 140
Angleof departure(° ) 20
Front turning radius without bucket(mm) 1064
Front tuning radius(mm) 1825
Rear tuning radius(mm) 1264
Rear axle to bumper (mm) 594
Tread width,enter line to centerline (mm) 1102
Width (mm) 1402
Bucket width (mm) 1500
-------------------------------------------------------------
Skid Steer Loader Model/Technical parameters HW-TS65
Operating load (kg) 1000
Max Speed（km/h） 0.67
Rated flux (L/min) 75
High Flow Flux (L/min)
Tire（track） model 320X84
Rated power (Kw) 55
Fuel tank capacity (L) 80
self weight bucket (kg) 3800
Bucket capacity (m3) 0.5
Overall operating height (mm) 3480
Height to bucket hinge pin (mm) 2900
height to top of cab (mm) 2150
Height to bottom of level bucket(mm) 2730
Overall length without bucket（mm） 2750
overall length with bucket(mm) 3500
Dumping angle at maximum height(° ) 40
Dumping height(mm) 2230
Dumping reach(mm) 715
Rollback o bucket on ground(° ) 30
Rollback of bucket at full height(° ) 104
Wheelbase(mm) 1500
Ground clearance(mm) 200
Angleof departure(° ) 20
Front turning radius without bucket(mm) 1298
Front tuning radius(mm) 2010
Rear tuning radius(mm) 1714
Rear axle to bumper (mm) 890
Tread width,enter line to centerline (mm) 1462
Width (mm) 1782
Bucket width (mm) 1830
-------------------------------------------------------------
Skid Steer Loader Model/Technical parameters HW-TS75
Operating load (kg) 1050
Max Speed（km/h） 0.67
Rated flux (L/min) 80
High Flow Flux (L/min) 120
Tire（track） model 320 X 84
Rated power (Kw) 55
Fuel tank capacity (L) 90
self weight bucket (kg) 3800
Bucket capacity (m3) 0.5
Overall operating height (mm) 3480
Height to bucket hinge pin (mm) 2900
height to top of cab (mm) 2150
Height to bottom of level bucket(mm) 2730
Overall length without bucket（mm） 2750
overall length with bucket(mm) 3500
Dumping angle at maximum height(° ) 40
Dumping height(mm) 2230
Dumping reach(mm) 715
Rollback o bucket on ground(° ) 30
Rollback of bucket at full height(° ) 104
Wheelbase(mm) 1500
Ground clearance(mm) 200
Angleof departure(° ) 20
Front turning radius without bucket(mm) 1298
Front tuning radius(mm) 2010
Rear tuning radius(mm) 1714
Rear axle to bumper (mm) 890
Tread width, enter line to centerline (mm) 1462
Width (mm) 1782
Bucket width (mm) 1830
-------------------------------------------------------------
Skid Steer Loader Model/Technical parameters HW-TS100
Operating load (kg) 1200
Max Speed（km/h） 0.67
Rated flux (L/min) 88
High Flow Flux (L/min) 140
Tire（track） model 320 X 84
Rated power (Kw) 74
Fuel tank capacity (L) 90
self weight bucket (kg) 4500
Bucket capacity (m3) 0.55
Overall operating height (mm) 4070
Height to bucket hinge pin (mm) 3150
height to top of cab (mm) 2160
Height to bottom of level bucket(mm) 2983
Overall length without bucket（mm） 3000
overall length with bucket(mm) 3700
Dumping angle at maximum height(° ) 40
Dumping height(mm) 2450
Dumping reach(mm) 700
Rollback o bucket on ground(° ) 30
Rollback of bucket at full height(° ) 104
Wheelbase(mm) 1500
Ground clearance(mm) 200
Angleof departure(° ) 20
Front turning radius without bucket(mm) 1365
Front tuning radius(mm) 2200
Rear tuning radius(mm) 1742
Rear axle to bumper (mm) 938
Tread width, enter line to centerline (mm) 1654
Width (mm) 1994
Bucket width (mm) 2030
-------------------------------------------------------------
Skid Steer Loader Model/Technical parameters HW-TS100
Model HW-TS125
Operating load (kg) 1500
Max Speed（km/h） 0.67
Rated flux (L/min) 88
High Flow Flux (L/min) 140
Tire（track） model 450 X 86
Rated power (Kw) 103
Fuel tank capacity (L) 90
self weight bucket (kg) 4800
Bucket capacity (m3) 0.6
Overall operating height (mm) 4070
Height to bucket hinge pin (mm) 3150
height to top of cab (mm) 2160
Height to bottom of level bucket(mm) 2983
Overall length without bucket（mm） 3000
overall length with bucket(mm) 3700
Dumping angle at maximum height(° ) 40
Dumping height(mm) 2450
Dumping reach(mm) 700
Rollback o bucket on ground(° ) 30
Rollback of bucket at full height(° ) 104
Wheelbase(mm) 1500
Ground clearance(mm) 200
Angleof departure(° ) 20
Front turning radius without bucket(mm) 1365
Front tuning radius(mm) 2200
Rear tuning radius(mm) 1742
Rear axle to bumper (mm) 938
Tread width, enter line to centerline (mm) 1654
Width (mm) 2124
Bucket width (mm) 2160
Operating load (kg) 700
Max Speed（km/h） 0.67
Rated flux (L/min) 60
High Flow Flux (L/min)
Tire（track） model 300X52.5
Rated power (Kw) 36
Fuel tank capacity (L) 50
self weight bucket (kg) 2800
Bucket capacity (m3) 0.3
Overall operating height (mm) 3350
Height to bucket hinge pin (mm) 2770
height to top of cab (mm) 2050
Height to bottom of level bucket(mm) 2603
Overall length without bucket（mm） 2300
overall length with bucket(mm) 2950
Dumping angle at maximum height(° ) 40
Dumping height(mm) 2100
Dumping reach(mm) 790
Rollback o bucket on ground(° ) 30
Rollback of bucket at full height(° ) 104
Wheelbase(mm) 1240
Ground clearance(mm) 140
Angleof departure(° ) 20
Front turning radius without bucket(mm) 1064
Front tuning radius(mm) 1825
Rear tuning radius(mm) 1264
Rear axle to bumper (mm) 594
Tread width,enter line to centerline (mm) 1102
Width (mm) 1402
Bucket width (mm) 1500
-------------------------------------------------------------
Skid Steer Loader Model/Technical parameters HW-TS65
Operating load (kg) 1000
Max Speed（km/h） 0.67
Rated flux (L/min) 75
High Flow Flux (L/min)
Tire（track） model 320X84
Rated power (Kw) 55
Fuel tank capacity (L) 80
self weight bucket (kg) 3800
Bucket capacity (m3) 0.5
Overall operating height (mm) 3480
Height to bucket hinge pin (mm) 2900
height to top of cab (mm) 2150
Height to bottom of level bucket(mm) 2730
Overall length without bucket（mm） 2750
overall length with bucket(mm) 3500
Dumping angle at maximum height(° ) 40
Dumping height(mm) 2230
Dumping reach(mm) 715
Rollback o bucket on ground(° ) 30
Rollback of bucket at full height(° ) 104
Wheelbase(mm) 1500
Ground clearance(mm) 200
Angleof departure(° ) 20
Front turning radius without bucket(mm) 1298
Front tuning radius(mm) 2010
Rear tuning radius(mm) 1714
Rear axle to bumper (mm) 890
Tread width,enter line to centerline (mm) 1462
Width (mm) 1782
Bucket width (mm) 1830
-------------------------------------------------------------
Skid Steer Loader Model/Technical parameters HW-TS75
Operating load (kg) 1050
Max Speed（km/h） 0.67
Rated flux (L/min) 80
High Flow Flux (L/min) 120
Tire（track） model 320 X 84
Rated power (Kw) 55
Fuel tank capacity (L) 90
self weight bucket (kg) 3800
Bucket capacity (m3) 0.5
Overall operating height (mm) 3480
Height to bucket hinge pin (mm) 2900
height to top of cab (mm) 2150
Height to bottom of level bucket(mm) 2730
Overall length without bucket（mm） 2750
overall length with bucket(mm) 3500
Dumping angle at maximum height(° ) 40
Dumping height(mm) 2230
Dumping reach(mm) 715
Rollback o bucket on ground(° ) 30
Rollback of bucket at full height(° ) 104
Wheelbase(mm) 1500
Ground clearance(mm) 200
Angleof departure(° ) 20
Front turning radius without bucket(mm) 1298
Front tuning radius(mm) 2010
Rear tuning radius(mm) 1714
Rear axle to bumper (mm) 890
Tread width, enter line to centerline (mm) 1462
Width (mm) 1782
Bucket width (mm) 1830
-------------------------------------------------------------
Skid Steer Loader Model/Technical parameters HW-TS100
Operating load (kg) 1200
Max Speed（km/h） 0.67
Rated flux (L/min) 88
High Flow Flux (L/min) 140
Tire（track） model 320 X 84
Rated power (Kw) 74
Fuel tank capacity (L) 90
self weight bucket (kg) 4500
Bucket capacity (m3) 0.55
Overall operating height (mm) 4070
Height to bucket hinge pin (mm) 3150
height to top of cab (mm) 2160
Height to bottom of level bucket(mm) 2983
Overall length without bucket（mm） 3000
overall length with bucket(mm) 3700
Dumping angle at maximum height(° ) 40
Dumping height(mm) 2450
Dumping reach(mm) 700
Rollback o bucket on ground(° ) 30
Rollback of bucket at full height(° ) 104
Wheelbase(mm) 1500
Ground clearance(mm) 200
Angleof departure(° ) 20
Front turning radius without bucket(mm) 1365
Front tuning radius(mm) 2200
Rear tuning radius(mm) 1742
Rear axle to bumper (mm) 938
Tread width, enter line to centerline (mm) 1654
Width (mm) 1994
Bucket width (mm) 2030
-------------------------------------------------------------
Skid Steer Loader Model/Technical parameters HW-TS100
Model HW-TS125
Operating load (kg) 1500
Max Speed（km/h） 0.67
Rated flux (L/min) 88
High Flow Flux (L/min) 140
Tire（track） model 450 X 86
Rated power (Kw) 103
Fuel tank capacity (L) 90
self weight bucket (kg) 4800
Bucket capacity (m3) 0.6
Overall operating height (mm) 4070
Height to bucket hinge pin (mm) 3150
height to top of cab (mm) 2160
Height to bottom of level bucket(mm) 2983
Overall length without bucket（mm） 3000
overall length with bucket(mm) 3700
Dumping angle at maximum height(° ) 40
Dumping height(mm) 2450
Dumping reach(mm) 700
Rollback o bucket on ground(° ) 30
Rollback of bucket at full height(° ) 104
Wheelbase(mm) 1500
Ground clearance(mm) 200
Angleof departure(° ) 20
Front turning radius without bucket(mm) 1365
Front tuning radius(mm) 2200
Rear tuning radius(mm) 1742
Rear axle to bumper (mm) 938
Tread width, enter line to centerline (mm) 1654
Width (mm) 2124
Bucket width (mm) 2160
Warranty terms
All our products we offer one year warranty
Customize product
We can put the label of your logo on the products or make the silk print of your logo on the products. It is free. OEM and ODM are welcomed from GT. We have rich experiences in this area.
Pre-sale service
Arranging of independent inspection We can provide a full Pre-sale service Please see more
SPARE PARTS
We have a full stock of spare parts. These parts are always on stock which avoids and delays in ordering.
SHIPPING
We can arrange shipping from our yard to your door worldwide.Well choose the nearest shipping place to ship at the shortest time. Please see more
Materials and specifications are subject to change without notice.
Featured machines in photos may include additional equipment. The specification do not necessarily show the standard version of the machine.
Ask our manager for available options.
09.00 - 17.00 hrs Monday - Friday
Not available on Saturday's or Sunday's